Home > John Deere > Gauges
Sort By:
Page of 1
Ammeter (20-0-20) Black Face Ammeter (20-0-20) White Face Tachometer Rear Bracket
Tachometer Rear Bracket
Our Price: $25.95
Fits John Deere - [ A, AH, AN, AW (Styled SN: 700200 & up) ], [ B, BN, BW (Styled SN: 306600 & up) ], D (Styled mid 1952 & later), [ G, GH, GN, GW (Styled SN: 60700 & up) ], [ M, MC, MI, MT, R (mid 1952 & later) ], 40, 50, 60, 70, 80, 320, 330, 420, 430, 435, 440, 520, 530, 620, 630, 720, 730, 820 2 cylinder, 830 2 cylinder, 840 (2 cylinder models); Replaces: AM1864T, AF2749R

This gauge has a plain face without the John Deere logo as shown above. This 20-0-20 ammeter has a metal base, glass lens, black faceplate and a black bezel. 		Fits John Deere - [ A, AH, AI, AN, ANH, AW, AWH (Styled & Unstyled up to SN: 700200) ], [ AO, AOS, AR (To Mid 1952) ], [ B, BI, BN, BNH, BW, BW40, BWH, BWH40 (Styled & Unstyled up to SN: 306600) ], BO, BR, D (Styled and Unstyled to mid 1952), [ G, GH, GM, GN, GW (Styled & Unstyled up to SN: 60700) ], H, HN, HNH, HW, HWH, L, LA, LI, [ M, MC, MI, MT, R (to mid 1952) ]; Replaces: AM354T, AB2568R, AB1190R

This gauge has a plain face without the John Deere logo as shown above. Can also be used on later models but the face plate color is not correct for tractors after mid 1952. 		TACHOMETER REAR BRACKET - JOHN DEERE G 50 60 70
Oil Pressure Gauge (0-25 PSI) - Dash mounted, White Face Engine mounted Oil Pressure Gauge (0-25 PSI) - White Face Oil Pressure Gauge (0-25 PSI) - Dash mounted, Black Face
Fits John Deere - [ A, AN, ANH, AW, AWH (SN: 477000 to 700199) ], [ AO, AR (SN: 272000 to mid 1952) ], [ B, BN, BNH, BW, BWH, BWH40 (SN: 60000 to 306599) ], D (SN: 143800 to mid 1952), [ G, GH, GM, GN, GW (SN: 13000 to 60699) ], H, HN, HNH, HW, HWH, [ M, MC, MI, MT (to mid 1952) ]; Replaces: AB1549R

It will also work on later serial numbers but the face plate color is not correct. This gauge is shipped with 1/8" male pipe threads. Unless you can reuse your old adapter fitting for the oil line to the gauge, you will need one of the following depending on the line size: ABC538 (1/8" line) or IHS626 (1/4" line).
This gauge has a plain face without the John Deere logo as shown above. 		Fits John Deere - [ A, AN, AW (up to SN: 476999) ], AI, [ AO, AR (up to SN: 271999) ], AOS, [ B, BN, BNH, BW, BWH (up to SN: 59999) ], BO, BR, D (up to SN: 143799), [ G, GH, GN, GW (up to SN: 12999) ]; Replaces: AM737T, AB292R, AA1730R

This gauge has a plain face without the John Deere logo as shown above. Can also be used on later models but the face plate color is not correct for tractors after mid 1952. 		Fits John Deere - [ A, AH, AN, AW (Styled SN: 700200 & up) ], [ B, BN, BW (Styled SN: 306600 & up) ], D (Styled mid 1952 & later), [ G, GH, GN, GW (Styled SN: 60700 & up) ], 50, 60, 70, [ 330, 430, 440 (Requires purchase of ABC523 line kit & ABC538 fitting.) ], 520, 530, 620, 630, 720, 730 (gas & LP); Replaces: AF2775R, AF2752R

*Requires purchase of ABC523 copper line kit if installing on JD 330, 430, and 440 Gas. This gauge is shipped with 1/8" male pipe threads. Unless you can reuse your old adapter fitting for the oil line to the gauge, you will need one of the following depending on the line size: ABC538 (1/8" line) or IHS626 (1/4" line).
This gauge has a plain face without the John Deere logo as shown above.
Oil Pressure Gauge (0-30 PSI) - Engine mounted Tachometer Cable Water Temperature Gauge with white face and 3' lead
Tachometer Cable
Our Price: $26.99
Fits John Deere - [ M, MC, MI, MT (mid 1952 & up) ], 40, 320, 420; Replaces: AM284T

This oil pressure gauge has a metal base, glass lens and a black bezel. This gauge does not have studs and is designed to screw into the governor or oil filter base. This oil pressure gauge is a mechanical gauge. The measurement of the threaded fitting is 1/8” NPT male thread. 		TACHOMETER CABLE - JOHN DEERE 3010 3020 4000 4010 4020 4320 & MORE Fits John Deere - [ A, AH, AI, AN, ANH, AO, AOS, AR, AW, AWH, B, BI, BN, BNH, BO, BR, BW, BW40, BWH, BWH40, D, DI, G, GH, GM, GN, GW, H, HN, HNH, HW, HWH (Some, To Mid 1952) ]; Replaces: AA883R, AA3538R

This water temperature gauge has a metal base, glass lens and a black bezel. This gauge has a 3’ capillary lead. Please measure the length required for your tractor before ordering. The measurements are: 5/8” – 18 NF end with a ½” NPT pipe bushing. This gauge has a plain face without the John Deere logo as shown above. Can also be used on later models but the face plate color is not correct for tractors after mid 1952
Water Temperature Gauge, 48" lead Water Temperature Gauge, Black Face, 48" Lead Water Temperature Gauge with white face and 6' lead
Fits John Deere - [ A, AH, AN, ANH, AW, AWH (Styled SN: 477000 to 700200) ], [ AO, AR (Styled SN: 272000 & up) ], [ B, BN, BNH, BW, BWH, BWH40 (Styled SN: 60000 to 306600) ], D (Styled SN: 143800 to mid year 1952), [ G, GH, GM, GN, GW (Styled SN: 13000 to 60700) ], [ M, MC, MI, MT, MTN, MTW (to mid 1952) ], R (to Mid 1952); Replaces: AM2444T, AA3535R, AA3534R, AA1342R

This water temperature gauge has a white face with a 48" right angle lead. Can also be used on later models but the face plate color is not correct for tractors after mid 1952. 		Fits John Deere - [ A, AH, AN, AW (Styled mid 1952 & up, SN: 700200 & up) ], [ AO, AR (Styled mid 1952 & up) ], [ B, BN, BW (Will fit models with SN: 306600 & up but the lead will be longer than needed) ], D (Styled (mid 1952 & later)), [ G, GH, GN, GW (Styled (SN: 60700 & up) ) ], [ M, MC, MI, MT, MTN, MTW (mid 1952 & up) ], R (Mid 1952 & up), 40 (1952 & later; gas, LP ), [ 50, 60, 70, 80, 520, 530, 620, 630, 70D, 720D, 730, 730D, 820 2 cylinder, 830 2 cylinder (including regular Rowcrop, Standard, Orchard, all fuel, propane, and diesel models) ], [ 320, 330, 420, 430, 440 (Gas, LP) ], 840 (2 cylinder diesel); Replaces: AM3950T, AR20783, AT13849T, AM3092T, AM2444T, AA7263R, AF2192R, AF2774R, AA6295R

This gauge has a plain face without the John Deere logo as shown above. This water temperature gauge has a black face with a 48" right angle lead. 		Fits John Deere - [ A, AH, AI, AN, ANH, AO, AOS, AR, AW, AWH, B, BI, BN, BNH, BO, BR, BW, BW40, BWH, BWH40, D, DI, G, GH, GM, GN, GW, H, HN, HNH, HW, HWH, M, MC, MI, MT, R (Some, To Mid 1952) ]; Replaces: AM610T, AM1609T, AA1342R

This water temperature gauge has a metal base, glass lens and a black bezel. This gauge has a 6’ capillary lead. Please measure the length required for your tractor before ordering. The measurements are: 5/8” – 18 NF end with a ½” NPT pipe bushing. This gauge has a plain face without the John Deere logo as shown above. . Can also be used on later models but the face plate color is not correct for tractors after mid 1952.
Water Temperature Gauge, 3' lead Water Temperature Gauge, 6 ft lead Oil Pressure Gauge (0-55 PSI) - Dash mounted, Black Face
Fits John Deere - [ A, AH, AN, AW (Styled models SN: 700200 & up) ], [ B, BN, BW (Styled models SN: 306600 & up) ], [ G, GH, GN, GW (Styled Models SN: 607000 & up) ]


This water temperature gauge has a metal base, glass lens and a black bezel. This gauge has a 3’ capillary lead. Please measure the length required for your tractor before ordering. The measurements are: 5/8” – 18 NF end with a ½” NPT pipe bushing. 		Fits John Deere - [ A, AH, AN, AW (SN: 700200 & up) ], [ AR, D (Styled Mid 1952 & later) ], [ B, BN, BW (SN: 306600 & up) ], [ G, GH, GN, GW (SN: 60700 & up) ], [ M, MC, MI, MT, R (Mid 1952 & later) ], 40, 50, 60, 70, 80, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 820 2 cylinder, 830 2 cylinder, 840 2 cylinder; Replaces: AR490R, AT13849T, AR20783R, AM2444T, AA7263R, AA6295R

This gauge has a plain face without the John Deere logo as shown above. This water temperature gauge has a metal base, glass lens and a black bezel. This gauge has a 6’ capillary lead. Please measure the length required for your tractor before ordering. The measurements are: 5/8” – 18 NF end with a ½” NPT pipe bushing. 		Fits John Deere - [ 70, 720, 730 (Diesel) ], 80, [ 820 2 cylinder, 830 2 cylinder, 840 2 cylinder (2 cylinder) ]; Replaces: AF2868R, Sub: AF2729R

This gauge is shipped with 1/8" male pipe threads. Unless you can reuse your old adapter fitting for the oil line to the gauge, you will need one of the following depending on the line size: ABC538 (1/8" line) or IHS626 (1/4" line).
This gauge has a plain face without the John Deere logo as shown above.
Tachometer Cable Water Temperature Gauge Tachometer Cable
Tachometer Cable
Our Price: $33.99
Water Temperature Gauge
Our Price: $35.99
Tachometer Cable
Our Price: $36.99
TACHOMETER CABLE - JOHN DEERE 420 430 440 Fits John Deere - [ A, AN, ANH, AW, AWH (up to sn 476999) ], [ AI, AO, AOS, AR (up to sn 264299) ], [ B, BN, BNH, BW, BW40, BWH, BWH40 (up to sn 166999) ], BI, BO, BR, [ D, DI (sn 125430 to 143799) ], [ G, GH, GN (up to sn 12999) ], H, HN, HNH, HW, HWH; Replaces: AA883R, AA3538R

This water temperature gauge has a a 23" lead and it fits John Deere hand start models. This water temperature gauge has a metal base a glass lens and a black bezel. This gauge has a plain face without the John Deere logo as shown above. Can also be used on later models but the face plate color is not correct for tractors after mid 1952. 		TACHOMETER CABLE - JOHN DEERE 70 620 720 730
Tachometer Cable Tachometer Cable Fuel Gauge (12 Volt negative ground only)
Tachometer Cable
Our Price: $37.99
Tachometer Cable
Our Price: $39.95
TACHOMETER CABLE - JOHN DEERE A AR AO B 50 60 TACHOMETER CABLE - JOHN DEERE 70 520 530 630
Water Temperature Gauge Water Temperature Gauge Tachometer Fits Many John Deere 2 Cylinder Models
Water Temperature Gauge
Our Price: $41.99
Water Temperature Gauge
Our Price: $41.99
WATER TEMPERATURE GAUGE - JOHN DEERE 2520 3020 4020 4320 4520 4620 7020 Fits John Deere - A (sn 648000 and up), [ AO, AR (sn 272000 and up) ], B (sn 201000 and up), 50, 60, [ 70, 720, 730 (Diesel) ], 70, 520, 530, 620, 630, 720, 730; Replaces: AR21662, AR21661, AR21663, AR21663R, AR21664R, AR20836, AR20825, AB5134R, AF2066R, AF2698R, AR20055R, AB5132R